Can You Use Barbed Wire Protect Your Property?

Private Property With Barbed Wires On Top of Fence

Basic Info. On Barbed Wire Fences

A barbed wire fence installation is usually implemented for livestock, in farms or even in prisons. As far as using a barbed wire fence on a residential property they are actually frowned upon and may cause you more trouble than they are worth if someone is injured. Just like with roof inspections it’s best to keep up with fence maintenance and check barbed wire fence accessories in case anything is out of order. Below you will find how to barbed wire fence installations, fence logistics, specifications, and recommendations. Remember, any barbed wire fence installation should be handled with care or by a professional in order to avoid the risk of injury. If you’re interested in other types of fence installation we recommend speaking to a professional for recommendations on what fence would work best for the purpose of your property. Whenever you’re in doubt a professional fence expert will be able to properly guide you through your property’s specifications and requirements.

Can I put barbed wire on my fence to stop intruders?

A barbed wire fence installation is actually not advisable if it’s to protect a residential property from people. In legal matters, you are actually opening yourself up to civil action since you are liable to ensure that visitors on your property are relatively safe. In all technicality, you have a duty of care to any potential trespassers.

Can I use barbed wire to protect my property?

A  barbed wire fence installation may not be recommended for certain areas. Police on boundary security states recommend not to use razor wire, broken glass or barbed wire as a form of protection on fences of walls as you might be legally responsible for any injuries that could arise.

Can you electrify barbed wire?

Barbed wire can technically be electrified when wanting a barbed wire fence installation. However, this isn’t done often as this makes a dangerous fence and because of this is even unlawful in certain areas. As far as the logistics, it’s important to get an idea of how an electric fence’s flow of electricity may be hindered with barbed wires. First, there is a concept that comes into hand called electrical resistance. With a regular fence, an electric pulse would run down the smooth surface fast and uniformly. With joints implemented into the wire, you have a potential for electrical resistance, which is why joints are kept to a minimum with an electric fence. As there are many joints in barbed wire and woven wire both are usually not selected for the use of electric fences. If an electrical fence is desired, smooth steel wire is the material most often used. Other alternatives that have arisen in the last 15-20 years are synthetic webbing and rope-like fencing materials woven into fine conducting wires (typically stainless steel.)

How tall should a barbed wire fence be?

A barbed wire fence installation should usually have 3-5 strands of barbed wire stretched between posts with a fence height that’s typically 51-54 inches. Spacing between the wires will depend on the amount of line wires present and the height of the fence yet line posts are usually 12-20 feet apart.

Barbed Wire Fence & Sunset Sky Over Farm Field

How To Install A Barbed Wire Fence

1.  Select the corner and end location.

2. Install wood posts H-braces for and double corner H-braces for corners.

3.  Adjust post length if a taller fence is required.

4.  Carefully unfurl 4-8 feet of barbed wire and wrap them around starting the post and back at a preferred height for lowest strand.

5.  Unroll the barbed wire carefully to the end of the fence.

6.  Tension the wire with a chain wire strainer at the end.

7.  Cut the barbed wire to length and fasten to height as before.

8.  Adjust the first wire to have a straight line with light tension. (Pick it up a couple of feet then drop it.)

9.  Using first wire as a straight line install line posts 15-20 feet apart or closer if high-pressure fencing is needed. (Get thicker post for the latter.)

10.  Fasten the barbed wire to T-post with a wire clip OR staple barbed wire to wooden posts leaving room to float.

11. Make sure all line posts have a strain on it’s stout. For wooden posts at dips or crowns.

12. Repeat process for additional wires.

How much does it cost to put up a barbed wire fence?

The average barbed wire fence installation cost with a fence that’s five-strand and between 1,000-1,500 feet is usually $1-$3 per foot. With labor costs and local materials, you may actually see a range of $5-$6 per foot.

Barbed Wire Fence Life Expectancy

Average fence life is determined by a combination of wire and post life expectancies, you can expect a design life of 20 years for an average barbed wire fence installation.

If you’d like help with a barbed wire fence installation in Tulsa, OK call 918-221-0048 with T-Town Fence & Gate!